VPOC™ Module

The VPOC™ (Virtual Power on Call) Module is a 10kW Swappable Power Module for use in the VPOC™ Shelf by Lite-On Power System Solutions. Combined with the 1U Li-ion battery or the 3U VRLA battery, this is the key component for businesses looking to improve the delivery of power and protect their critical infrastructure.

The highly-efficient VPOC™ Module easily slides into the 1U VPOC™ Shelf alongside two swappable lithium-Ion battery modules that offer 2.5 minutes of runtime at full load. A valve-regulated, lead acid battery pack option is also available. For power distribution, the VPOC™ PDU supplies AC and DC power to your servers.

VPOC™ Module by Lite-On Cloud Infrastructure Power Solutions (Virtual Power on Call)
“10kW AC and DC output power at 99% efficiency.”
Input voltage, nominal208VAC / 220VAC / 230VAC / 240VAC
Output voltage, nominal208VAC / 220VAC / 230VAC / 240VAC or 240VDC
High Efficiency99% efficiency during AC or DC operation
Module Power10kW output power – AC and DC
Built-in BypassInternal automatic and integral maintenance bypass
Fast mode conversion< 4ms @ AC mode transfer to DC backup mode
ProtectionInternal AC bypass, Input over voltage, over temperature
Overload, Powering surge limiter, Excessive battery charging / discharging
REPO, AC Breaker, backfeed, fan lock, Fault-tolerant design
Multiple Communication PortsUSB, CAN, RS-232 – ModBus communication protocol
Small Form FactorDesigned for the 1U VPOC Shelf – Dimensions (H x W x D) 1.65” x 4.02” x 19.5” (40.5 mm x 102 mm x 480 mm)
In/Out Phase ConfigurationSingle-Phase AC input
ApprovalsUL60950-1, IEC60950-1 International, GB4943, RoHS
Input (AC)
Input voltage, nominal208V / 220V / 230V / 240V (L-N-G)
Input voltage range187~264V Full Load
Input frequency50/60 Hz, auto sensing
Power Factor @ Full computer or R Load> 0.99
Input current total harmonics distortion @ Full R Load< 3%
Efficiency @ Full R Load, bypass and AC mode> 99%
Efficiency @ Full R Load, DC mode> 99%
Output Power10 kVA
Active Power10 kW
Output voltage, nominal (AC)208V/220V/230V/240V AC(L-N-G)
Output voltage, nominal (DC)240V DC
Output Voltage Range (DC)192V~300V DC, 200~300V @ full load
Transfer time AC to DC mode< 4ms @ full load
Overload capabilityContinuous at 105%
VPOC™ Shelf loaded with the 10kW VPOC™ Module and two Li-ion battery modules.
Shown above is a VPOC™ Shelf with removed bezel, a VPOC™ Power Module slightly disengaged, and two Lithium-ion battery modules.

VPOC™ System Components

The VPOC™ system provides a comprehensive power management and battery backup capability based on multiple building blocks with configuration flexibility to suit specific power, size, and run-time requirements. The table below provides additional information on the different building blocks available to create a customized power solution. Please contact your Lite-On CIPS representative for support or more in-depth information.
ComponentModel NumberDescription
VPOC™ ModuleVM-3103-111U10kW Power Module
VPOC™ ShelfVP-3103-111UVPOC™ Power Shelf with 3 slots:
  • 1 VPOC™ Power Module slot
  • 2 VPOC™ Li-ion Battery Module slots
1U or 0U
Cabinet PDU with 20A fuse and IEC320-C13 receptacles (6) plus IEC320-C19 receptacles (2)
Expansion PDU with 20A fuse and IEC320-C13 receptacles (6) plus IEC320-C19 receptacles (2)
0U Cabinet PDU with 20A/30A fuses and IEC320-C13 receptacles (12) plus IEC320-C19 receptacles (2)
VPOC™ Li-ion Battery UnitBM-1502-010U
2.5 minute runtime at 5kW (2 battery units provide 2.5 minutes at 10kW)
4kW VPOC™ Li-ion Battery Module
VPOC™ VRLA Extended Battery ModuleBK-1151-010U3U EBM equipped with VRLA batteries for 3.5 minute runtime at 10kW
Site Management ControllerCP-13EC-010URack management and control
19″ RackKT-1942-10119-inch EIA rack